飲料機械 果蔬機械 面食機械 糕點設備 烘焙設備 豆制品設備 乳制品設備 茶葉機械 制冷設備 油炸設備 膨化設備 糖果機械 調味品設備 薯類加工設備 釀酒設備
蘇州君思儀器科技有限公司
參 考 價 | 面議 |
產品型號Milli-Q Integral 純水系統
品 牌
廠商性質其他
所 在 地蘇州市
聯系方式:查看聯系方式
更新時間:2025-07-25 19:45:01瀏覽次數:8次
聯系我時,請告知來自 食品機械設備網暫無信息 |
概述Milli-Q® Integral is a unique combination of optimized water purification and monitoring technologies. It allows, in a single device, both pure (Type 2) and ultrapure (Type 1) water to be produced directly from potable water. This all-in-one concept offers several benefits:Provides users with complete control over all water purification steps and the final water quality. Allows installation of a comprehensive water purification chain in a minimal amount of space. Eliminates the constraints of centralized wat
規格
Water Specifications
Milli-Q® Integral ultrapure water (Type 1)
Resistivity at 25 °C1 18.2 MΩ?cm TOC2 ≤ 5 ppb Particulates (size > 0.22 μm)3 < 1 particulate/mL Bacteria3,4 < 0.01 CFU/mL Pyrogens (endotoxins)4 < 0.001 EU/mL RNases4 < 1 pg/mL DNases4 < 5 pg/mL Flow Rate Up to 2 L/min 1resistivity can also be displayed non-temperature-compensated as required by USP
2in the appropriate test conditions
3with Millipak® final filter
4with Biopak® polisher
These values are typical and may vary depending on the nature and concentration of contaminants in the feed water.Milli-Q® Integral pure water (Type 2)
Resistivity at 25 °C1 Typically 10-15 MΩ?cm TOC < 30 ppb Production flow Rate 3 L/h (Milli-Q® Integral 3)
5 L/h (Milli-Q® Integral 5)
10 L/h (Milli-Q® Integral 10)
15 L/h (Milli-Q® Integral 15)From an E-POD® dispenser with final filter, the following water quality specifications are achieved: Particulates (size > 0.22 µm)2 < 1 particulate/mL Bacteria2,3 < 0.1 CFU/mL Pyrogens (endotoxins)3 < 0.001 EU/mL RNases3 < 0.01 ng/mL DNases3 < 4 pg/µL Flow Rate Up to 2 L/min 1Resistivity can also be displayed non-temperature-compensated as required by USP
2with Millipak® final filter
3with Biopak® PolisherFeed water
Feed water quality Potable tap water as described in US-EPA, EP and WHO norms Feed water connection ?" Gaz M Feed water pressure* 1 - 6 bar Feed water temperature 5 - 35 °C * For pressure above 6 bar, a pressure regulator needs to be installed upstream of the system System Specifications
Production unit
Dimensions (H x W x D) 500 x 332 x 484 mm (19.7 x 13.0 x 19.0 in) Operating weight 24 - 28 kg (52.9 - 61.7 lb) Electric power supply voltage 100 - 230 V +/- 10% Electric power supply frequency 50 - 60 Hz +/- 10% Milli-Q® Integral main unit data connection Ethernet (RJ45) Q-POD® & E-POD® dispensers
Dimensions (H x D) 579 x 230 mm (22.8 x 9.0 in) Operating weight 4.7 kg (12.1 lb) Dispenser tubing length 0.8 m (31.5 in) Distance from production unit to Q-POD® 2.9 m (9.5 ft) Electric power cable length 2.9 m (9.5 ft) Q-POD® data connection Parallel port (25-pin D-Sub)
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
食品機械設備網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
蘇州君思儀器科技有限公司