API 600鑄鋼閘閥
API 600 Cast Steel Gate
Z41H Z40H Z41Y Z4OY Z41W Z40W 壓力范圍：Class 150Lb-1500Lb 1500psi-5000psi 1.6Mpa-250Mpa
彈性閥座：Z40H-150Lb Z4OY-150Lb Z40W-150Lb Z40H-300Lb Z4OY-300Lb Z40W-300Lb~1500Lb
契式閘閥：Z41H-150Lb Z41Y-150Lb Z41W-150Lb Z41H-300Lb Z41Y-300Lb Z41W-300Lb~1500Lb
Y 硬質合金 Horniness H 合金鋼 Alloyed steel
即使在理想的實驗室測試環境下，不考慮法蘭光潔度和密封墊負載，API 600
所規定的沒有石墨的標準密封墊也被認為不適用于低排放場合。在測試了幾種替代
密封墊后，我們選擇了在我們的測試中表現性能的密封墊 - 帶石墨填料通路
的波紋鋼板密封墊。
Standard corrugated steel gaskets without graphite as specified in API 600 were found to be an unacceptable choice for low emission service, even under ideal laboratory test conditions, and regardless of flange finish and gasket load. After testing several alternative gaskets, we selected the best performing gasket in our tests - a corrugated steel gasket with graphite filled channels.
API 600 鑄鋼閘閥概述 及使用材料
- 更安全、更緊密地閥桿密封。
Safer and tighter stem seal. - 又短又窄的填料腔改善了密封性能。
Short and narrow packing chamber improves sealing effectiveness. - 配置雙填料和無泄漏的長壽命防泄漏填料腔或單填料。
雙填料：經過4000 psi壓縮的兩套石墨填料密封環。也可選擇一個套環和leak-off，用于消除泄漏現象。
單填料：在編織環之間放置三個或四個石墨環，密度80-90磅/立方英尺。
Long-life leakproof packing chamber with double packing and leak-off or single set packing.
Double packing: two sets of graphite packing rings compressed to 4000 psi. A lantern ring and leak-off provide option for removal of leakage, if any, from lower packing set.
Single set packing: three or four graphite rings between braided rings, 80-90 lbs./cu. ft. density. - 動負載。
兩套免維護長期保持閥桿緊密性的Belleville彈簧。
Live-loading.
Two sets of Belleville springs keep stem tight for long periods of time without maintenance. - 兩件式閥桿驅動可在線更新。
Two-piece stem drive is renewable in-line. - 更有效的防泄漏閥體-閥帽連接。
150磅級：石墨填充波紋鋼板密封墊。
300-600磅級：全封閉螺旋纏繞石墨填充不銹鋼密封墊。
Stronger leakproof body-bonnet joint.
Class 150: Corrugated graphite-filled steel gasket.
Class 300-600: Fully-encased spiral wound graphite-filled stainless steel gasket. - 300，600，900和1500磅級配置圓形閥帽和封閉密封墊。
Classes 300, 600, 900 and 1500 have round bonnet and encased gasket
鎢鉻鈷合金6硬面的焊接裝配閥座。
Welded-in seats hardfaced with Slite 6. - 柔性一件式楔板，采用鎢鉻鈷合金6或13 CR硬面（DN200以上采用實心13 CR）。
Flexible one-piece wedge, hardfaced with Slite 6 or 13 CR （solid 13 CR up to 8"）. - 13 CR硬化的閥桿，接近鏡面的拋光度，延長填料的使用壽命。
13 CR hardened stem with mirror-like, burnished finish for longer packing life
規格 主要尺寸和重量 Size Main Dimensions and Weight
| DN | 150Lb凸面法蘭（RF） 主要尺寸 Dimensions（mm） | 重量（kg） Weight |
| mm | in | L | D | D1 | D2 | b | n-φd | H | D0 |
| 15 | 1/2 | 108 | 89 | 60.5 | 35 | 11.2 | 4-16 | 169 | 100 | 5 |
| 20 | 3/4 | 117 | 98 | 69.9 | 43 | 12.7 | 4-16 | 192 | 100 | 6.1 |
| 25 | 1 | 127 | 108 | 79.2 | 51 | 14.2 | 4-16 | 230 | 120 | 9 |
| 32 | 11/4 | 140 | 117 | 89 | 63 | 16 | 4-16 | 246 | 120 | 12 |
| 40 | 11/2 | 165 | 127 | 98.6 | 73 | 17.5 | 4-16 | 283 | 150 | 17 |
| 50 | 2 | 178 | 152 | 120.7 | 92 | 19.0 | 4-19 | 323 | 150 | 23 |
| 65 | 21/2 | 190.5 | 178 | 139.7 | 105 | 22.4 | 4-19 | 347 | 180 | 45 |
| 80 | 3 | 203 | 190 | 152.4 | 127 | 24 | 4-19 | 383 | 200 | 50 |
| 100 | 4 | 229 | 229 | 190.5 | 157 | 24 | 8-19 | 457 | 200 | 63 |
| 125 | 5 | 254 | 254 | 216 | 186 | 24 | 8-22.5 | 632 | 250 | 89 |
| 150 | 6 | 267 | 279 | 241.5 | 216 | 25.4 | 8-22.5 | 635 | 250 | 108 |
| 200 | 8 | 292 | 343 | 298.5 | 270 | 28.4 | 8-22.5 | 762 | 280 | 171 |
| 250 | 10 | 330 | 406 | 362 | 324 | 30.2 | 12-25.4 | 892 | 300 | 263 |
| 300 | 12 | 356 | 483 | 431.8 | 381 | 32 | 12-25.4 | 1080 | 350 | 346 |
| 350 | 14 | 381 | 533 | 476.3 | 413 | 35 | 12-29 | 1295 | 350 | 488 |
| 400 | 16 | 406 | 597 | 539.8 | 470 | 36.6 | 16-29 | 1435 | 400 | 621 |
| 450 | 18 | 432 | 635 | 577.9 | 533 | 39.6 | 16-32 | 1626 | 400 | 814 |
| 500 | 20 | 457 | 398 | 635 | 584 | 43 | 20-32 | 1829 | 450 | 992 |
| 600 | 24 | 508 | 813 | 749.3 | 692 | 48.8 | 20-35 | 2175 | 500 | 1492 |
| 650 | 26 | 559 | 786 | 744.5 | 711 | 51.3 | 36-22.5 | 2235 | 550 | 1801 |
| 700 | 28 | 610 | 837 | 795.3 | 762 | 44.5 | 40-22.5 | 2310 | 600 | 1933 |
| 750 | 30 | 610 | 887 | 846 | 813 | 44.5 | 44-22.5 | 2695 | 600 | 2272 |
| 800 | 32 | 660 | 941 | 900 | 864 | 46 | 48-22.5 | 3708 | -- | -- |
| 900 | 36 | 711 | 1057 | 1009.7 | 927 | 52.3 | 40-25.4 | 3924 | -- | -- |
| 1000 | 40 | 812 | 1175 | 1120.6 | 1080 | 55.6 | 44-25.4 | 4318 | -- | -- |
- 高度不包括執行機構。
Height does not include actuator. - 齒輪執行機構。
Gear actuator. - 300磅級以上的對焊和法蘭閥門具有相同的面到面尺寸。
Butt weld and flanged valves have the same end-to-end dimensions for Class 300 and up.
蝶閥 閘閥 球閥 截止閥 止回閥 調節閥 安全閥
會員1.png)