進口杠桿式疏水閥(德國OLES奧萊斯閥門)

【進口杠桿式疏水閥】詳細說明：

杠桿浮球式蒸汽疏水閥，該閥剛啟動時，自動排空氣裝置迅速排除系統中不凝結氣體。當蒸汽和熱凝結水進入后，閥腔內溫度隨著升高，排空氣裝置自動關閉，浮球根據凝結水水位的變化而作升降，帶動杠桿調節閥座孔的開度，連續排放凝結水。當凝結水停止進入時，浮球靠自重下降，驅使杠桿帶動閥芯關閉排水閥座孔。用于蒸汽加熱設備和凝結水回收系統及需要快速排除凝結水的工況，能自動、迅速、連續地排除凝結水，有效地阻止蒸汽泄漏，并獲得的加熱效果。

進口疏水閥作用：當蒸汽冷凝時釋放蒸發焓形成冷凝水，冷凝水中只含有飽和水焓，為了確保系統的大傳熱效率，冷凝水必須從系統中排除。蒸汽中所攜帶的空氣和其它不凝性氣體在蒸汽和換熱面上形成熱阻層同樣也必須從系統中排除。疏水閥的基本作用是將蒸汽系統中的凝結水、空氣和二氧化碳氣體盡快排出；同時大限度地自動防止蒸汽的泄漏。

Lever floating ball steam trap, when the valve is just started, the automatic air exhaust device quickly removes the non-condensable gas in the system. When the steam and thermal condensate water enter, the temperature in the valve chamber increases, the exhaust air device automatically closes, and the float ball rises and falls according to the change of condensate water level, driving the lever to adjust the opening of the valve seat hole, and continuously discharges the condensate water. When the condensate water stops entering, the float ball drops by its weight, driving the lever to drive the spool to close the drainage seat hole. Used in steam heating equipment and condensate water recovery system and working conditions requiring rapid removal of condensate water, condensate water can be automatically, rapidly and continuously removed, effectively prevent steam leakage, and obtain the best heating effect.

Import trap function: When steam condensates, evaporation enthalpy is released to form condensate water, which contains only saturated enthalpy. In order to ensure the maximum heat transfer efficiency of the system, condensate must be removed from the system. The air and other non-condensable gases carried in the steam must also be removed from the system to form a thermal resistance layer on the steam and heat exchange surface. The basic function of the trap is to expel the condensate water, air and carbon dioxide gas from the steam system as soon as possible, and at the same time to prevent the leakage of steam to the maximum extent automatically.

【進口杠桿式疏水閥】特性：

①能連續排放飽和凝結水加熱設備不會有水積聚，從而獲得zui高的熱效率；

②蒸汽壓力變化時不受影響浮球帶動杠桿自動調節閥座孔的開度，工作連續，性能穩定；

③排空氣性能好自動排空氣裝置能排除不凝結的冷熱氣體，無氣鎖現象，工作平穩無噪音；

④密封性能，密封面采用球面結構，工作時無集中磨損，使用壽命長。

杠桿浮球式蒸汽疏水閥用途特點

（一）杠桿浮球式蒸汽疏水閥用途：

杠桿浮球疏水閥，廣泛用于工業蒸汽加熱設備，各種大型熱交換器及干燥機、夾套鍋等，特別應用于冷凝水特大排量在的工作場合.

（二）杠桿浮球式蒸汽疏水閥特點：

此超大排量型蒸汽疏水閥，在整個工作壓力范圍內無需調整和更換內件，即可充分排除大量的疑結水。排水過冷度可達0℃，特別適合用于疑結水量大的工作場合。