精品视频在线观看专区,饥渴老熟妇乱子伦视频,五月天综合婷婷综合社,国产精品美女久久久久久小说

產品展廳收藏該商鋪

您好 登錄 注冊

當前位置:
格翎(上海)環境科技有限公司>>>>強制循環結晶器

強制循環結晶器

返回列表頁
  • 強制循環結晶器

收藏
舉報
參考價 面議
具體成交價以合同協議為準
  • 型號
  • 品牌
  • 廠商性質 0
  • 所在地 上海市

在線詢價 收藏產品 加入對比

更新時間:2017-08-15 15:26:44瀏覽次數:620

聯系我們時請說明是食品機械設備網上看到的信息,謝謝!

聯系方式:李先生查看聯系方式

產品簡介

強制循環蒸發結晶器又稱FC( Forced Circulation )型結晶器,是一種可以連續生產的通用型結晶設備,廣泛應用于化工、輕工、醫藥等行業的生產以及環保行業廢水蒸發結晶處理。根據料液性質的不同,F(xiàn)C型結晶器分為加熱蒸發型、間壁冷卻型或真空冷卻型等以滿足各種結晶工藝的需要。

詳細介紹

  • 強制循環蒸發結晶器

    一、概 述:

    強制循環蒸發結晶器又稱FC( Forced Circulation )型結晶器,是一種可以連續生產的通用型結晶設備,廣泛應用于化工、輕工、醫藥等行業的生產以及環保行業廢水蒸發結晶處理。根據料液性質的不同,F(xiàn)C型結晶器分為加熱蒸發型、間壁冷卻型或真空冷卻型等以滿足各種結晶工藝的需要。

    強制循環蒸發結晶器是由加熱器對待處理的料液進行加熱進入結晶分離室蒸發分離,溶液達到過飽和狀態便產生結晶現象,由強制循環泵經多次循環加熱后結晶室內過飽和溶液沉浸在懸浮晶粒表面上,使晶體逐漸長大,當晶體數量達到一定濃度時即可將晶漿排出另作處理。強制循環蒸發結晶器具有生產能力大,產品的粒度分布較寬,約在0.8~4mm 的范圍,適應各種物料的結晶等特點。

    二、結構組成:

    強制循環蒸發結晶器主要由換熱器、結晶分離室、冷凝器、循環管、循環泵、晶漿泵、真空泵、控制系統等組成;按物料濃度高低與生產能力的大小不同,可分為一效、二效、三效、四效強制循環蒸發器。

    三、設備規格:

    Model

    GLQX-01

    GLQX-02

    GLQX-03

    GLQX-04

    蒸發量(t/h

    Water Evaporation capacity

    0.1-2

    0.5-10

    2-20

    5-50

    進料濃度(%

    Input concentration

    各種濃度物料,具體根據客戶的物料而定(According to material

    蒸汽壓力(Mpa

    Steam pressure

    0.4-0.8

    蒸汽耗量(帶熱壓泵)Steam consumption  capacity

    with heat pressure pump

    0.65

    0.38

    0.28

    0.18

    真空度(Mpa

    Maximum Vacuum

    -0.0300.090

    蒸發溫度(

    Evaporation temperature

    45-90

    冷卻水耗量

    (進水30℃,出水40℃

    Cooling water cost/Evaporation capacity

    2-40

    7.5-150

    25-250

    50-500

    注:上表系蒸發型設備,所列規格參數僅供參考之用,具體設備參數需根據客戶物料情況與要求另行設計。

    NoteWe can design and manufacture according to customer’s special requirement.

    四、設備圖片:

     

     

     

     

     

     

     

     

     

     

    Forced Type Circulation Evaporation Crystallizer

    I. Introduction

    Forced Circulation Evaporation Crystallizer is a kind of continuous crystallizer with crystal slurry circulation. On production, raw solution feed from bottom of circulation pipeline,and then mixed with crystal slurry which left from bottom of crystallizer, the mixed fluid will be pumped into the heat exchanger,it will increase temperature in the heater (normal increase 2-6℃),but it will not evaporation. Once hot crystal slurry flow into crystallization chamber,after boiling, it will reached super saturation,so parts of solute sedimentate on the surface of suspended crystal, and then grow bigger,finally discharge out from the top of circulation tubes. FC Crystallizer have large production capacity, but product size dimension arranged widely.

    II. Structure Component

    Forced Circulation Crystallizer consist of Crystallization Chamber, circulation tubes, circulation pump and heat exchanger etc.

    Crystallization Chamber designed with cone type bottom,crystal slurry discharge out from the cone bottom,pumped into the heat exchanger by Axial Flow pump through circulation tubes,after heating or cooling,re-back into the crystallization chamber,it will continue having such circulation running.that’s the reason it called crysta-slurry circulation type.crystal slurry discharge let is near the bottom of crystallization chamber,and feed let is lower then discharge level.

    III. Usage

    Forced Circulation Evaporation Crystallizer widely used in the industry of chemical, light industry,pharmacy etc, for product manufacturing and waste water treatment. FC type Crystallizer could work for evaporation crystallization, batch cooling crystallization or vacuum cooling crystallization. Product size dimension during the range of 0.8-4mm. 

     

     

收藏該商鋪

登錄 后再收藏

提示

您的留言已提交成功!我們將在第一時間回復您~

對比框

產品對比 二維碼

掃一掃訪問手機商鋪
在線留言