Micrometer
Ideal for any number of industries, the ChemInstruments Micrometer accurately measures the thickness of a variety of substrates. The standard unit meets or exceeds numerous test methods, including ASTM D645, D374, D3652, PSTC 133 and TLMI T-411. It can measure paper, tissue, corrugated paperboard, carton board, fiberboard, felt, film, foil, plastic and rubber.
This versatile Micrometer unit features three modes of operation: single, continuous and batch. In the single test mode, the presser foot cycles with each press of the start button. In the continuous mode, the presser foot cycles continuously. In the batch mode, the micrometer can be set to run a series of measurements. The number of cycles can be set from one to 50 with a pause between each measurement. In all modes, the presser foot travels and pauses per ASTM D645 method.
美國ChemInstruments 公司研制的MI-1000測微計適用于各種工業用壓敏膠襯底的厚度測量. 符合歐美及其它國際的測試標準, 例如ASTM D645, D374, D3652, PSTC 133 及 TLMI T-411等測試標準. 可用于測量普通紙張, 棉紙, 波紋紙板, 硬紙板, 纖維板, 氈毛制品, 薄膜, 鋁薄, 塑料薄膜及橡膠等材料的厚度.
設備特點
此測量計可用于單一, 連續及批量等測量. 在單一測試時, 測量壓頭按照起動按鈕的指令做單次運動. 在連續測試時, 測量壓頭按照所編制的程度做連續性的運動. 在批量測試時, 測量壓頭按照所編制的程度做序列性的運動, 循環動作可設定為一到五十次并可做間歇停留. 測量壓頭之行程及停留的設計符合測試標準ASTM D645.
精確度可達3.8 um (0.00005吋)；
0.001吋 或 微米顯示器；
可選擇數據輸出方式, 全部輸出或選擇輸出；
設計緊湊, 便于攜帶；
設有自動校準系數；
包括 NIST 0.040吋校準用測量儀表；
測量范圍可達0.05吋 (1.27 mm)；
操作溫度 0 ℃ 到70 ℃ ；
尺寸：
高 12 吋 (30公分）
寬 7.5 吋(19 公分）
深 10 吋 (26 公分)
重 16.5磅(8 公斤）
會員1.png)
